Core cutter

  • Core cutter type HS 100
    huelsensaege-hs100-09The core cutter (saw) type HS 100 m is used to cut cardboard cores using a saw cut. This core saw has a pneumatical saw movement The specially lined housing dampens sound emissions during the sawing process. The sawdust is collected using a suction system. In conjunction with a core magazine, a core inserter, a electric motor positioning stop and a core ejector, the machine is upgraded to a fully automatic core sawing system. In a special version of this core cutter, “sample rolls” (i.e. cores with paper wound on) or thick cardboard cores can be sawn. The length stop can be supplied with a scale or digital display.

    Technical data of the machine displayed

    Raw core length: 2.300 mm (or more)
    Internal core diameter: ø 3'' - 6''
    Core wall thickness: 10-50 mm
    Core material: Coreboard
    Sample roll diameter: ø 210 mm
  • Core cutter type HSB-m
    Hülsenabstechmaschine HSB-mThe core cutter type HSB-m is used to cut coreboard cores using a dust-free crush cut. This is a manually operated machine using manual cutting force. When beiing cut the core rests on drive rollers.
    The machine can be equipped with a pneumatic cutting force system (type HSB-p), too.
    The length stop can be supplied with a scale or digital display.


    Technical data of the machine displayed

    Core length: 2.000 mm (and more)
    Core inner diameter: ø 2'' - 6''
    Wall thickness: 2 -20 mm
    Core material: Core board
  • Core cutter type HSB-tw
    Hülsenschneider HSB-tw The core cutter type HSB-tw is used to cut coreboard cores using a dust-free crush cut. The advantage of this machine concept is the support roller bed, which supports the core during cutting. The support rollers can be easily cleaned if adhesive residues from used cores should stick. The cutting force can be installed manually or pneumatically.

    Technical data of the machine displayed

    Core length: 2.700 mm
    Core inner diameter: ø 50 - 150 mm
    Core thickness: 2-20 mm
    Core material: Coreboard
  • Core cutter type HSE
    The core cutter type HSE is used to cut cardboard cores using a dust-free crush cut. The semi-automatic machine takes in the raw core and then positions and cutts it according to the selected cutting program. Adding an automated core storage the machine is upgraded to a fully automatic machine.

    Technical Data

    Core length: 2.100 mm
    Core inner diameter: ø 6''
    Core thickness: 5 - 20 mm
    Core material: Coreboard


    Core cutter type HSE 2100
    Core cutter type HSE 2100
    Core cutter type HSE 2100
    Core cutter type HSE 2100
    Core cutter type HSE 2100
    Core cutter type HSE 2100



     

Blue
Green
Orange
Red